Table of Contents
Advertisement
post max max Output Comparison (Continued)
TABLE 11-6
Output Displayed
0>IO-Bridge unit 1 PCI id test
0>
INFO:10 count read passed for IOBD/PCI-SWITCH!
Last read VID:10b5|DID:8532
0>
INFO:10 count read passed for IOBD/PCIE-IO!
Last read VID:10b9|DID:5249
0>
INFO:10 count read passed for IOBD/GBE! Last
read VID:1166|DID:103
0>
INFO:10 count read passed for IOBD/PCI-BRIDGE!
Last read VID:8086|DID:341
0>
INFO:10 count read passed for IOBD/SASHBA!
Last read VID:1000|DID:50
0>Print Mem Config
0>Caches : Icache is ON, Dcache is ON, Wcache is ON,
Pcache is ON.
0>Memory interleave set to 0
0> Bank 0 2048MB : 00000000.00000000 ->
00000000.7fffffff.
0>Block Memory
0>Test 2141192192 bytes on bank 0....
0>0% Done...
0>2% Done...
...
0>98% Done...
0>99% Done...
0>INFO:
0>
POST Passed all devices.
0>
0>POST: Return to OBP.
Error messages are reported when they are found. Examples of POST messages are
shown in "Analyzing POST Messages" on page 11-14.
11-12
Sun Ultra 45 and Ultra 25 Workstations Service and Diagnostics Manual • May 2006
What Is Happening
The PCI IDs of the on-board
devices are checked.
Memory configuration is to be
displayed.
Cache status is displayed.
The amount of memory installed
is displayed.
Memory is checked by block
memory tests.
Memory is checked in bank0.
POST has passed successfully and
returns control to the OpenBoot
PROM.
Advertisement
Table of Contents
