Table of Contents
Advertisement
Removing the Hard Drive
FIGURE 4-1
4.1.2
Installing a Hard Drive
Caution – Use proper ESD grounding technique when handling components. Wear
an antistatic wrist strap and use an antistatic mat. Store ESD-sensitive components in
antistatic bags before placing them on any surface.
1. Power off the system and attach an antistatic wrist strap. Open and position the
chassis, and remove the access panel.
Refer to "Powering Off the Workstation" on page 2-4.
Chapter 4 Replacing Storage Devices
HDD0
4-3
Advertisement
Table of Contents
