Sony VPL-X2000U Service Manual page 92

Aligning projectors
9
Wall
Center of the screen
3rd projector
2nd
1st
English
9
Remove the lens cap on the 2nd projector or release the
muting by pressing the MUTING key.
10
Press the PATTERN key for the 1st projector on the
Remote Commander or the control panel to display the
HATCH pattern in cyan.
11
Press the PATTERN key for the 2nd projector on the
Remote Commander or the control panel to display the
HATCH pattern in yellow.
(Continued to page 30)
28
Picture of the 1st projector (cyan)
projector
projector
Picture of the 2nd projector (yellow)
Aligning projectors
English
Align the picture of the 2nd projector with that of the 1st projector
for the following adjustments. When both pictures are aligned
correctly, the HATCH pattern is displayed in white.
12
Adjust the focus for the 2nd projector.
13
Adjust the picture size and the vertical positioning.
Picture size
Adjust it using the ZOOM + or – key on the Remote
Commander or the control panel.
Vertical positioning
Adjust it using the SHIFT + or – key on the Remote
Commander or the control panel.
Notes
• Be sure not to readjust the focus after aligning both
pictures.
• Be sure not to readjust the 1st projector while adjusting
the 2nd projector.
(Continued to page 34)
30