Installation
4
English
4
Re-position the projector with the mounting plate attached
so that it faces in the original direction. Then, slide the
projector into the tray of the projector stand from the rear,
using the guides.
5
Slide the projector in until the mounting plate stops
(foremost position).
Use the screws (4) removed in step 2.
14
5
Installation
2
A
English
Stacking the projector stand
You can stack up to three SU-PJ2000 projector stands.
1
Put the 1st projector stand with the projector at the place
they are to be used.
Place the stand on a flat surface facing the screen.
2
Display the HATCH pattern of the projector, adjust the
horizontal and vertical positioning and fix the A (4) with
the commercially available bolts (M14) and washers (M14).
3
Follow to the steps 1 to 3 of "Attaching the projector to the
projector stand" (page 10) for 2nd and 3rd projectors.
4
Stack the 2nd projector stand on the 1st stand.
(Continued)
16
A