Table of Contents
Advertisement
Using the Menu
The projector is equipped with an on-screen menu for
making various adjustments and settings.
Unadjustable items are not displayed in the menu.
To change the language used in the menu, see page
30 (GB).
1
Press the MENU key.
The menu display appears.
The menu presently selected is highlighted in
yellow.
PICTURE CTRL
VIDEO
CONTRAST:
80
BRIGHT:
50
COLOR:
50
HUE:
50
SHARP:
50
D.PICTURE:
OFF
COLOR TEMP:
LOW
COLOR SYS:
AUTO
DRC:
HIGH
2
Use the V or v key to select a menu, then press the
b or the ENTER key.
The setting items of the selected menu are
displayed.
Setting items
Menus
SET SETTING
INPUT-A
STATUS:
ON
SPEAKER:
ON
LANGUAGE:
ENGLISH
INSTALLATION:
FLOOR-FRONT
OFF
POWER SAVING:
SIRCS RECEIVER:
FRONT&REAR
GROUP INDEX:
0 1
DEVICE INDEX:
0 1
3
Make setting or adjustment on an item.
For details on setting individual items, see the relevant
menu pages.
24
(GB)
To erase the menu display
Press the MENU key. The menu display also
disappears automatically if no key is pressed for one
minute.
To reset settings that have been adjusted
Press the RESET key.
"Reset complete!" appears on the screen and the
settings appearing on the screen will be reset to their
factory preset values.
Items that can be reset are as follows:
CONTRAST, BRIGHT, COLOR, HUE, SHARP,
DOT PHASE, SIZE, SHIFT and BLANKING.
About the memory of the settings
The settings are automatically stored in the projector
memory.
The PICTURE CTRL Menu
The PICTURE CTRL menu is used for adjusting the
picture. Unadjustable items are not displayed in the
menu.
PICTURE CTRL
VIDEO
CONTRAST:
80
BRIGHT:
50
COLOR:
50
HUE:
50
SHARP:
50
D.PICTURE:
OFF
COLOR TEMP:
LOW
COLOR SYS:
AUTO
DRC:
HIGH
Operation
1. Select an item
Use the V or v key to select the item, then press the b
or the ENTER key.
2. Adjust an item
• When changing the adjustment level:
To increase the number, press the V or b key.
To decrease the number, press the v or B key.
Press the ENTER key to restore the original screen.
• When changing the setting:
Press the V or v key to change the setting, then press
the B or the ENTER key.
The original screen is restored.
CONTRAST
Adjusts the picture contrast.
CONTRAST: 80
The higher the setting, the greater the contrast.
The lower the setting, the lower the contrast.
BRIGHT (Brightness)
Adjusts the picture brightness.
BRIGHT: 80
The higher the setting, the brighter the picture.
The lower the setting, the darker the picture.
COLOR
Adjusts color intensity.
COLOR: 50
The higher the setting, the greater the intensity.
The lower the setting, the lower the intensity.
HUE
Adjusts skin tones.
HUE: 50
At high settings, the picture becomes greenish.
At low settings, the picture becomes purplish.
SHARP (Sharpness)
Adjusts the picture sharpness.
SHARP: 80
The higher the setting, the sharper the picture.
The lower the setting, the softer the picture.
D. (Dynamic) PICTURE
Emphasizes the black color.
PICTURE CTRL
VIDEO
CONTRAST:
80
BRIGHT:
50
COLOR:
50
HUE:
50
SHARP:
50
D.PICTURE:
OFF
OFF
COLOR TEMP:
HIGH
ON
COLOR SYS:
AUTO
DRC:
HIGH
ON: Emphasizes the black color to produce a bolder
"dynamic" picture.
OFF: Reproduces the dark portions of the picture
accurately, in accordance with the source signal.
25
(GB)
Advertisement
Table of Contents
Troubleshooting
