Sony VPL-X2000U Service Manual page 33

Specifications
Optical characteristics
Projection system 3 LCD panels, 1 lens, 3-primary
color optical shutter system
LCD panel 1.8-inch XGA LCD panel,
2,359,296 pixels
(786,432 pixels × 3)
Lens Option
Light output ANSI lumen 1) 2,400 lm
120 W UHP × 4
Lamp
Electrical characteristics
Color system NTSC /PAL/SECAM/NTSC /
3.58 4.43
PAL-M system, switched
automatically
Resolution 600 horizontal TV lines (video
input)
1024 × 768 dots (RGB input)
Acceptable computer signal
fH: 15 to 94 kHz
fV: 40 to 120 Hz
Max. 5 W + 5 W, 90 × 50 mm
Speakers
× 2 inches), stereo
(3 5 /
8
Input/Output
CONTROL S IN/PLUG IN POWER: Stereo
minijack, 5 Vp-p, plug in power,
DC 5 V, maximum output 60 mA
OUT: Stereo minijack, 5 Vp-p
REMOTE RS-232C/422A
D-sub 9-pin (female)
(For details, see "Pin assignment"
on page 54 (GB).)
PJ COM IN: D-sub 9-pin (male)
OUT: D-sub 9-pin (female)
(For details, see "Pin assignment"
on page 54 (GB).)
TRIG Minijack
Power on: DC 12 V, output
impedance: 4.7 kilohms
Power off: 0 V
..........................................................................................................................................................................................................
1) ANSI lumen is a measuring method of American
National Standard IT 7.228.
52
(GB)
S VIDEO (priority to Y IN/C IN) (only for VPL-
X2000U/X2000M)
IN: Mini DIN 4-pin type (male)
Y (luminance): 1 Vp-p ± 2 dB
sync negative, 75 ohms
terminated
C (chrominance): Burst 0.286
Vp-p ± 2 dB (NTSC), 75 ohms
terminated
Burst 0.3 Vp-p ± 2 dB (PAL), 75
ohms terminated
OUT: Loop-through mini DIN 4-
pin type (male)
Loop-through output from the S
VIDEO IN connector
Y IN: BNC type
1 Vp-p ± 2 dB sync negative, 75
ohms terminated
C IN: BNC type
Burst 0.286 Vp-p ± 2 dB
(NTSC), 75 ohms terminated
Burst 0.3 Vp-p ± 2 dB (PAL), 75
ohms terminated
VIDEO (only for VPL-X2000U/X2000M)
IN: BNC type
Composite video, 1 Vp-p ± 2 dB
sync negative, 75 ohms
terminated
OUT: Loop-through BNC type
Loop-through output from the
VIDEO IN connector
AUDIO IN (only for VPL-X2000U/X2000M)
Phono type (stereo)
500 mVrms, impedance more
than 47 kilohms
INPUT A Analog RGB/component: BNC
type
R/R-Y: 0.7 Vp-p ± 2 dB positive,
75 ohms terminated
G: 0.7 Vp-p ± 2 dB positive, 75
ohms terminated
G with sync/Y: 1 Vp-p ± 2 dB sync
negative, 75 ohms
terminated
B/B-Y: 0.7 Vp-p ± 2 dB positive,
75 ohms terminated
SYNC/HD: Composite sync: 0.6–8
Vp-p, high impedance, sync
positive/negative
Horizontal sync: 0.6–8 Vp-p,
high impedance, sync positive/
negative
VD: Vertical sync: 0.6–8 Vp-p,
high impedance, sync positive/
negative
AUDIO IN: Phono type (stereo)
500 m Vrms, impedance more
than 47 kilohms
HDTV (Y/P /P ): BNC type
B R
Y: 1 Vp-p ± 2dB positive,
75 ohms
Tri-level sync: ± 0.3 Vp-p
Bi-level sync: 0.3 Vp-p
P /P : 0.35 Vp-p ± 2dB positive,
B R
75 ohms
HDTV (GBR): BNC type
G with sync: 1 Vp-p ± 2 dB,
75 ohms
Tri-level sync: ± 0.3 Vp-p
Bi-level sync: 0.3 Vp-p
B/R: 0.7 Vp-p ± 2dB positive,
75 ohms
AUDIO OUT (variable out)
Phono type, Max. 1 Vrms
When input is 500 mVrms:
impedance less than 5 kilohms
Safety regulations
VPL-X2000U: UL1950, c-UL
(CSA No. 950), FCC Class A, IC
Class A
VPL-X2000E/X2000M: EN60 950
(TÜV), CE, C-Tick
General
562 × 237 × 649 mm (22 × 9
1 3
Dimensions / /
4 8
× 25
5
/ inches) (w/h/d)
8
Mass Approx. 34.5 kg (76 lb 1 oz)
(excluding the optional lens)
Power requirements
VPL-X2000U: AC 100 to 120 V/
1)
220 to 240 V, 50/60 Hz
VPL-X2000E/X2000M: AC 220 to
240 V, 50/60 Hz
Power consumption
Approx. 770 W (Standby mode: 15W
for VPL-X2000U/X2000M, 20 W
for VPL-X2000E)
Heat dissipation 2628 BTU
Operating temperature
0°C to 40°C (32°F to 104°F)
Operating humidity
35% to 85% (no condensation)
..........................................................................................................................................................................................................
1) UL listed for 120 V operation.
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Storage humidity 10% to 90%
Supplied Accessories
Remote Commander RM-PJ1001 (1)
Size AA (R6) batteries (3)
Remote commander cable (stereo)
(15 m) (1)
AC power cord (1)
Terminator for the PJ COM
connector (1)
Lens ring (1)
Operating Instructions (1)
Installation Manual for Dealers (1)
Warranty (only for VPL-X2000U)
(1)
Design and specifications are subject to change
without notice.
Optional accessories
Projector Lamp LMP-Q2000 (for replacement)
Interface Board
IFB-12A (Analog RGB/component/HDTV/
composite video/S video input with 5BNC type
connectors)
IFB-20 (Analog RGB input with D-sub 9-pin type
connector)
IFB-21 (Analog RGB input/output with HD D-sub
15-pin type connector)
IFB-30 (Digital RGB input with D-sub 9-pin type
connector)
IFB-50 (serial digital video input/output with BNC
type connector)
IFB-1000 (Composite video input with BNC type
connector/S video input with mini DIN 4-pin
type connector)
IFB-X2000E (Composite video input with phono
jacks/S video input with mini DIN 4-pin type
connector) (only for VPL-X2000E)
Signal Interface Switcher PC-3000
Interface Unit IFU-1271/1271M
SIC Cable
SIC-10/20A/20C/21/22/23/24/24A/25/26/26A/30/
31/M1/M5/M15/M25/M50
9-pin remote cable (for PJ COM)
RCC-5G/10G/30G
(continued)
53
(GB)