Sony VPL-X2000U Service Manual page 58

Connection Examples
Connecting Multiple Projectors
Following are examples of multiple projectors installed
onto the optional SU-PJ2000 projector stand, such as by
stacking.
When not using the switcher
Install the optional IFB-12A interface board in the first
projector.
Set the IN/OUT switch on the IFB-12A to OUT.
For details on the IFB-12A interface board, refer to the
operating instructions supplied with it.
Computer
IFB-12A
INPUT C INPUT B INPUT A VIDEO
IN/OUT switch: OUT
AUDIO OUT
REMOTE CONTROL S TRIG DEVICE INDEX
0
Video
SIC-10 connecting cable
cable
(5BNC ˜ 5BNC)
(not
(not supplied)
RCC-5G/10G/30G
supplied)
connecting cable
(not supplied)
INPUT C INPUT B
INPUT A VIDEO
AUDIO OUT
REMOTE CONTROL S TRIG DEVICE INDEX
0
42
(GB)
For details on the SU-PJ2000 projector stand, refer to the
installation manual supplied with it.
Note
Installing the interface board and setting up the switch
must be done while the power of the projector is off.
VCR, etc.
Device index
number: 01
Rear
+
–
to a wall outlet
AC power cord
to AC IN
(supplied)
Attach the
supplied
terminator.
Signal flow
:
Device index
number: 02
Rear
+
–
to a wall outlet
AC power cord
to AC IN
(supplied)
Attach the
supplied
terminator.
When using the switcher
When connecting two PC-3000 switchers, up to 15
inputs can be selected as the input from the switchers.
Install the IFB-12A interface board in the first switcher
(on which you set the SW NO switch to 1) and set the
IN/OUT switch on the board to IN.
Rear
INPUT C INPUT B INPUT A VIDEO
AUDIO OUT
REMOTE CONTROL S TRIG DEVICE INDEX
0
RCC-5G/10G/30G
SIC-10 connecting cable
connecting cable
(5BNC ˜ 5BNC)
(not supplied)
(not supplied)
INPUT C INPUT B INPUT A VIDEO
AUDIO OUT
IFB-12A
IN/OUT switch: OUT
REMOTE CONTROL S TRIG DEVICE INDEX
0
PC-3000 switcher
SW NO switch: 1
IFB-12A
IN/OUT switch: IN
to OUTPUT
PC-3000 switcher
SW NO switch: 2
Notes
• Be sure to set the switcher number.
• Be sure to turn off the power of the projector when
setting up the device index number and connecting
cables.
Device index number: 02
+
–
AC power cord (supplied)
to a wall outlet
to AC IN
Attach the
supplied
terminator.
Device index number: 01
Signal flow
:
+
–
AC power cord (supplied)
to a wall outlet
to AC IN
SW NO.
2 3 4
1 5
8 6
7
to OUTPUT
to PJ COM OUT
OUT PUT
SW NO RS-232C/422A
RS-232C REMOTE
RS-422A RS-485 IN
RS-485 OUT
Computer
to IFB-12A to PJ COM IN
installed in
SW NO.
the switcher
2 3 4
1 5
8 6
7 Attach the
terminator
OUT PUT
SW NO RS-232C/422A
(supplied with
RS-232C
REMOTE
RS-422A RS-485 IN
the PC-3000).
RS-485 OUT
to PJ COM OUT
Computer
43
(GB)