Sony VPL-X2000U Service Manual page 20

The PICTURE CTRL Menu
COLOR TEMP (temperature)
Adjusts the color temperature.
PICTURE CTRL VIDEO
CONTRAST: 80
BRIGHT: 50
COLOR: 50
HUE: 50
SHARP: 50
D.PICTURE: OFF
COLOR TEMP: HIGH HIGH
COLOR SYS: LOW AUTO
DRC: HIGH
HIGH: Makes the white color bluish.
LOW: Makes the white color reddish.
COLOR SYS (system)
Selects the color system of the input signal.
PICTURE CTRL VIDEO
CONTRAST: 80
BRIGHT: 50
COLOR: 50
HUE: AUTO 50
NTSC3.58
SHARP: 50
D.PICTURE: PAL OFF
COLOR TEMP: HIGH SECAM
COLOR SYS: NTSC4.43 AUTO
DRC: HIGH PAL-M
Normally, set to AUTO.
If the picture is distorted or colorless, select the color
system (NTSC /PAL/SECAM/NTSC /PAL-M)
3.58 4.43
according to the input signal.
GAMMA MODE
Select either position to obtain an optimum picture.
PICTURE CTRL INPUT-A
CONTRAST: 80
BRIGHT: 50
COLOR TEMP: HIGH
GAMMA MODE: GRAPHICS GRAPHICS
TEXT
GRAPHICS: Improves the reproduction of half
tones. Photos can be reproduced in natural tones.
TEXT: Contrasts black and white. Suitable for
images with lots of text.
..........................................................................................................................................................................................................
1) NTSC is the color system used when playing back a video recorded in
4.43
NTSC color system on a NTSC system VCR.
4.43
26
(GB)
DRC (Digital Reality Creation)
Selects the level of DRC effects.
PICTURE CTRL VIDEO
CONTRAST: 80
BRIGHT: 50
COLOR: 50
HUE: 50
SHARP: 50
D.PICTURE: OFF
COLOR TEMP: LOW
COLOR SYS: HIGH AUTO
DRC: HIGH LOW
HIGH: Increases the DRC effects.
LOW: Decreases the DRC effects.
Input signals and adjustable/setting items
Input signal
Video RGB RGB
Item 15k Compo- RGB
or (preset) (not
RGB nent (preset)
S video (HDTV- preset)
Y/P /P )
B R
CONTRAST Y Y Y
Y Y Y
Y Y Y
BRIGHT
Y Y Y
N Y N
COLOR Y Y N
N N N
HUE Y Y N
(NTSC
3.58/
4.43 1)
only)
N Y N
SHARP Y Y N
N Y N
D. PICTURE Y N N
Y Y Y
COLOR Y Y Y
TEMP
N N N
COLOR Y N N
SYS
N N Y
GAMMA N N Y
MODE
Y Y N
Y N N
DRC
Y: Adjustable/can be set
N: Not adjustable/cannot be set
The INPUT SETTING Menu
The INPUT SETTING menu is used to change the
settings of the input signal. Unadjustable items, which
vary according to the input signal, are not displayed in
the menu.
INPUT SETTING INPUT-A
DOT PHASE: 8
SIZE H:1 3 4 4
SHIFT H:1 2 3 V: 1 2 3
1024x768
N O . 2 3
n 2 0
Operation
1. Select an item
Use the V or v key to select the item, then press the b
or the ENTER key.
2. Adjust an item
• When changing the adjustment level:
To increase the number, press the V or b key.
To decrease the number, press the v or B key.
Press the ENTER key to restore the original screen.
• When changing the setting:
Press the V or v key to change the setting, then press
the B or the ENTER key.
The original screen is restored.
DOT PHASE
Adjusts the phase of the LCD panel and the input
signal when H FILTER is set to OFF.
Adjust the value to obtain the clearest picture.
DOT PHASE: 8
SIZE
Adjusts the horizontal size of the picture.
SIZE H:1 3 4 4
As the setting for H increases, the horizontal size of
the picture becomes larger, and as the setting
decreases, the size becomes smaller. Adjust the setting
according to the input signal.
Use the B or b key to adjust the horizontal size.
SHIFT
Adjusts the position of the picture.
SHIFT H:1 2 3 V: 1 2 3
H adjusts the horizontal position of the picture, and
V adjusts the vertical position. As the setting for H
increases, the picture moves to the right, and as the
setting decreases, it moves to the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, it moves down.
Use the B or b key to adjust the horizontal position
and the V or v key for the vertical position.
SCAN CONV (converter)
Converts the signal to display the picture according to
the screen size.
INPUT SETTING INPUT-A
DOT PHASE: 8
SIZE H:1 0 5 6
SHIFT H:1 2 3 V: 1 2 3
SCAN CONV: ON ON
OFF
800x600
N O . 1 7
n 2 1
ON: Displays the picture according to the screen
size. The picture will lose some clarity.
OFF: Displays the picture while matching one pixel
of input picture element to that of the LCD. The
picture will be clear but the picture size will be
smaller.
27
(GB)