Sony VPL-X2000U Service Manual page 90

Installation
5
( a )
( d ) ( c )
English
5
Fix the 1st and 2nd stands.
Insert the shaft stack (c) from the under side and fix the
projector stand with the bracket stack (d). Fix the bracket
stack with the supplied screws M6 × 14 (a) (8) .
6
Triple stack: Stack the 3rd projector stand on the 2nd stand
and fix them as step 5.
7
Attach the projectors to the 2nd and 3rd projector stands.
18
Aligning projectors
English
Notes
• When adjusting with the Remote Commander, set a different
index number on each projector, and designate the projector to
be operated with the Remote Commander.
• For details on the following operations of the projector, see the
Installation Manual for Dealers of the VPL-X2000U/E/M.
-Setting the index number.
-Entering into the service mode.
-Adjusting the picture.
-Adjusting the focus.
• Complete the adjustment on the 1st projector as the pictures of
the 2nd and 3rd projectors are aligned with the picture of the 1st
projector.
1
Press the ON key of the Remote Commander or the control
panel for all projectors.
The ON indicator lights in green.
2
Enter into the SERVICE MODE for all projectors.
3
Put the lens cap on the 2nd and 3rd projectors or mute the
picture by pressing the MUTING key.
4
Press the PATTERN key for the 1st projector on the
Remote Commander or the control panel to display the
HATCH pattern.
5
Adjust the focus with the FOCUS + or – key on the Remote
Commander or the control panel.
6
Adjust the screen size using the ZOOM + or – key on the
Remote Commander or the control panel, and adjust the
vertical positioning using the SHIFT + or – key.
(Continued to page 24)
20