Sony VPL-X2000U Service Manual page 88

Installation
1
A B C
English
Attaching the projector to the projector stand
1
Loosen the screws a, b, c, d, and be sure that the each
screw is positioned to the mark line.
To move the screws to the correct position, turn the knobs
A, B, C.
To move screw a: turn the knob A.
To move screws b, c: turn the knob B.
To move screw d: turn the knob C.
(Continued)
10
a b c d
, , ,
M a r k
c
a
d
b
Screen side
S c r e w
Installation
2
Mounting plate
English
2
Remove the mounting plate from the projector stand.
Remove the screws (4) with the Phillips head screwdriver.
3
Turn over the projector, then turn over the mounting plate
and attach it to the projector aligning the projections of the
mounting plate with the holes of the projector.
Fix the plate with the supplied screw M10 × 20 (b) (4), flat
washer M10 (e) (4) and spring washer M10 (f) (4) by using
the wrench attached to the stand.
(Continued)
12
3
( b )
( f )
( e )