Sony VPL-X2000U Service Manual page 63

The INPUT SETTING Menu
The INPUT SETTING menu is used to change the
settings of the input signal. Unadjustable items, which
vary according to the input signal, are not displayed in
the menu.
INPUT SETTING INPUT-A
DOT PHASE: 8
SIZE H:1 3 4 4
SHIFT H:1 2 3 V: 1 2 3
1024x768
N O . 2 3
n 2 0
Operation
1. Select an item
Use the V or v key to select the item, then press the b
or the ENTER key.
2. Adjust an item
• When changing the adjustment level:
To increase the number, press the V or b key.
To decrease the number, press the v or B key.
Press the ENTER key to restore the original screen.
• When changing the setting:
Press the V or v key to change the setting, then press
the B or the ENTER key.
The original screen is restored.
DOT PHASE
Adjusts the phase of the LCD panel and the input
signal when H FILTER is set to OFF.
Adjust the value to obtain the clearest picture.
DOT PHASE: 8
52
(GB)
SIZE
Adjusts the horizontal size of the picture.
SIZE H:1 3 4 4
As the setting for H increases, the horizontal size of
the picture becomes larger, and as the setting
decreases, the size becomes smaller. Adjust the setting
according to the input signal.
Use the B or b key to adjust the horizontal size.
SHIFT
Adjusts the position of the picture.
SHIFT H:1 2 3 V: 1 2 3
H adjusts the horizontal position of the picture, and
V adjusts the vertical position. As the setting for H
increases, the picture moves to the right, and as the
setting decreases, it moves to the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, it moves down.
Use the B or b key to adjust the horizontal position
and the V or v key for the vertical position.
SCAN CONV (converter)
Converts the signal to display the picture according to
the screen size.
INPUT SETTING INPUT-A
DOT PHASE: 8
SIZE H:1 0 5 6
SHIFT H:1 2 3 V: 1 2 3
SCAN CONV: ON ON
OFF
800x600
N O . 1 7
n 2 1
ON: Displays the picture according to the screen
size. The picture will lose some clarity.
OFF: Displays the picture while matching one pixel
of input picture element to that of the LCD. The
picture will be clear but the picture size will be
smaller.
ASPECT
Sets the aspect ratio of the picture.
When inputting 16:9 (squeezed) signal from
equipment such as a DVD player, set to 16:9.
INPUT SETTING VIDEO
SHIFT H:1 2 3 V: 1 2 3
ASPECT: 4:3 4:3
16:9
BLANKING TOP
VIDEO/60
N O . 1
n 2 2
4:3: When the picture with ratio 4:3 is input
16:9: When the picture with ratio 16:9 (squeezed) is
input.
H FILTER
Corrects the vertical bands that appear on the picture.
INPUT SETTING INPUT-A
DOT PHASE: 8
SIZE H:1 2 6 6
SHIFT H:1 2 3 V: 1 2 3
SCAN CONV: ON
H FILTER: OFF OFF
ON
1280x1024
N O . 3 7
n 2 3
The vertical bands may occur when an RGB signal
with horizontal resolution of more than 1024 × 768
pixels is input. In such cases, set to ON. The picture
will loose some clarity, but the vertical bands will be
reduced. Set to OFF to associate a dot of the input
signal with a pixel of the LCD.
BLANKING
Adjusts if excess signals are seen with the picture, or
the whole picture is not seen clearly.
INPUT SETTING INPUT-A
DOT PHASE: 8
SIZE H:1 0 5 6
SHIFT H:1 2 3 V: 1 2 3
SCAN CONV: ON
BLANKING
8 0 0 × 6 0 0
N O . 0
n 2 4
Select BLANKING, then press the ENTER key to
display the blanking adjustment screen.
BLANKING
TOP: 1 2 6
BOTTOM: 2 3 4
RIGHT:
5 7
LEFT: 3 4
Use the V or v key to select the part to be adjusted, and
the B or b key to adjust.
Input signals and adjustable/setting items
Input signal
Item
Video or 15k Compo- RGB RGB
S video RGB nent (preset) (not preset)
DOT PHASE N N N Y Y
(except
for
HDTV)
SIZE N N N Y Y
SHIFT Y Y Y Y Y
SCAN CONV N N N Y Y
(Only for
lower
resolution
than
SVGA)
ASPECT Y Y Y N N
H FILTER N N N Y Y
(Higher (Higher
resolution resolution
than than XGA)
XGA)
Y Y Y Y Y
BLANKING
(TOP and (TOP (TOP and (HDTV-
BOTTOM and BOTTOM GBR,
only) BOTTOM only) HDTV-
only) Y/P /P
B R
only)
Y: Adjustable/can be set
N: Not adjustable/cannot be set
53
(GB)