Effect Parameters - Yamaha V50 Authorized Product Manual

Explanation
The combined volume of the effect and the un-
processed sound is adjusted by this setting. 100%
is maximum, and at 0% there will be no sound.
Note:
At a setting of 0%, neither the unprocessed nor the
processed sound will be heard. (However if the next
item stereo mix is on, then only the unprocessed sound
will be heard.
Note
If the DSP sound is distorted, decrease the (DSP)
Effect Output Level or the Synthesizer Volume.
(2)
Stereo mix
Function
Mix the processed sound with the unprocessed stereo
sound.
Settings
off, on
Explanation
Effect input processing is done in monaural. This
means that when stereo mix is "off", the stereo output
signal from the performance assign settings of each
instrument will be output in mono.
When this is set to "on", the mono processed
sound will be mixed with the original stereo output
signal, and output in stereo. This allows you to retain
the stereo signal while using an effect. (However, the
stereo positioning will appear to be slightly narrower.)
Page 32 has a signal flow diagram of the processed
and unprocessed sound.
Note:
When the DSP effect is on, and Stereo Mix is off, the
L/R assignments of the performance are not used.
This means that the performance effect PAN will have
no effect.

Effect parameters

Press (EFFECT) three times. (If the previous item
effect select has been set to "off", this will not be dis-
played.)
56
Voice Edit
Function
Make detailed settings for the effect.
Settings
Each type of effect has different settings.
Explanation
Make detailed settings for the effect as explained in
the charts on page 32.
It is possible to copy effect settings to another
performance or voice (see page 120).