Effect Parameters - Yamaha MOX8 Manual

Synthesizer parameter manual
Hide thumbs Also See for MOX8:
Table of Contents

Advertisement

2-3

Effect Parameters

2-3-1
A
AEG Phase
AM Depth
AM Inverse R
AM Speed
AM Wave
AMP Type
Analog Feel
Attack
Attack Offset
Attack Time
2-3-2
B
Bit Assign
Bottom
BPF1-10 Gain
2-3-3
C
Click Density
Click Level
Color
Common Release
Compress
Comp Attack
Comp Release
Comp Threshold
Comp Ratio
Offsets the phase of the Amplitude EG.
Determines the depth of Amplitude Modulation.
Determines the phase of the Amplitude Modulation for the R channel.
Determines the Amplitude Modulation speed.
Selects the wave for modulating the Amplitude.
Selects the amplifier type to be simulated.
Adds the characteristics of an analog flanger to the sound.
Determines the amount of time that elapses between the playing of a key
and the start of the compressor effect.
Determines the amount of time that elapses between the playing of a key
and the start of the wah effect.
Determines the attack time of the envelope follower.
Determines how Word Length is applied to the sound.
Determines the minimum value of the wah filter.
The Bottom parameter is available only when the value is less than that of
the Top parameter.
Determines each output gain of BPFs 1 - 10 of the Vocoder effect.
Determines the frequency at which the click sounds.
Click is the click sound of a metronome, that can be sounded during
playback or recording.
Determines the click level.
Determines the fixed phase modulation.
The Color parameter may not be effective depending on the values of the
Mode and Stage parameters.
Determines the amount of time that elapses between the releasing of a
note and the end of the effect.
This is a parameter of Multi Band Comp.
Determines the minimum input level at which the compressor effect is
applied.
Determines the amount of time that elapses between the playing of a key
and the start of the compressor effect.
Determines the amount of time that elapses between the releasing of a
note and the end of the compressor effect.
Determines the minimum input level at which the compressor effect is
applied.
Determines the ratio of the compressor.
56
Effects

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx49Mx61Mox6Moxf6Moxf8

Table of Contents