Using The Bar Graph - Yamaha V50 Authorized Product Manual

explained in detail in the next section.) Repeat this
procedure to record each sound.
(6) Press to end step recording. You will return
to pattern play mode for the pattern you just re-
corded. When you press
recorded will play.
If you decide to modify or correct the pattern,
repeat steps (2) – (6).
First we will explain the various items in the bar graph
display. The bar graph shows the following information.
(1) Bar number
This shows the number of bars (measures) in this pattern.
The bar graph (3) displays one measure at a time, so
when creating a pattern of 2 or more measures, this
number will indicate where you are in the pattern.
(2) Quantize
This shows the quantize setting you specified in the
" > Qntz" setting before pressing
quantize setting while recording, move the cursor to
" > Qntz" and press one of the following keys.
Set quantization to 1/4 (quarter note)
Set quantization to 1/8 (eighth note)
Set quantization to 1/16 (sixteenth
note)
Set quantization to 1/32 (thirty-se-
cond note)
the pattern you just

USING THE BAR GRAPH

To change the
If you have been recording using a preset pat-
tern, you will get the following display.
Select a pattern number to write your newly recorded
pattern into, and press the
You will get a message of "Are you sure?", so press
This completes step recording.
Set quantization to 1/6, 1/12, or 1/24.
When quantization is set to 1/4
quantization to 1/6
When quantization is set to 1/8
quantization to 1/12
When quantization is set to 1/16
quantization to 1/24
Pressing this key again will erase the
symbol.
Turn quantization off.
Note:
Quantization can be modified only when the cursor
(–) is at the beginning of the bar graph. If the cursor
is anywhere else when you modify the quantization,
the displayed quantization value will blink (indicating
that it is not yet active) until you return the cursor
to the beginning of the bar graph.
(3) Bar graph
The bar graph displays the data of a single rhythm in-
strument for one measure. For example, if the time
signature is 4/4, the bar graph will be as follows.
Or, if the time signature is 6/8, the bar graph will be
as follows.
below " >GO".
pressing this key will set
pressing this key will set
pressing this key will set
Using the rhythm machine
63