Yamaha V50 Authorized Product Manual page 40

Settings for 29: Tone Control 2
Parameter Settings
HPF 160Hz–
1000Hz, thru
–12dB–+12dB
Middle
LPF 1.25KHz–12.0KHz Specify the cutoff frequency for
Settings for 32: Distortion
Parameter Settings
0%–100%
Dist.
HPF 160 Hz–
1000 Hz, thru
LPF 1.25KHz-12.0KHz
Comment
Specify the high pass filter set-
ting. Frequencies below the
specified frequency will be cut.
Mid range control. + is boost, -
is cut. (This is a presence-type
band pass filter with the fre-
quency fixed at 1260Hz.)
the low pass filter. Frequencies
above the specified frequency
will be cut.
Comment
Specify the amount of distortion.
Higher settings will cause more
distortion.
Specify the high pass filter
ting. Frequencies below the
specified frequency will be cut.
Specify the cutoff frequency for
the low pass filter. Frequencies
above the specified frequency
will be cut.
35
Performance Edit