Editing A Rhythm Song; Jump; Insert; Delete - Yamaha V50 Authorized Product Manual

While editing a rhythm song as explained in the previous
section, several editing jobs can be performed. While
editing a rhythm song, the display will be as follows.
Press the below " > JOB" to get the following
display.
This is where you select the editing operation.
Press the below " > Part".
Function
Jump to a specified part number.
Explanation
Input the part number you want to jump to, and press
the below " > GO".
Note:
If you specify a part number for which no data has
been entered, you will jump to the part after the last
entered part.

Insert

Press the below " > Ins".
Function
Insert a part.
Explanation
This inserts a part in front of a previously entered
part. The following parts will be moved back one.
When you press
of the currently selected part, and " =PTN***" will
begin blinking. Now you can enter a pattern number,
or a repeat, volume change, tempo change, etc.

EDITING A RHYTHM SONG

Jump

a part will be inserted in front

Delete

Press the below " > Del".
Function
Delete a part.
Explanation
This deletes the currently selected part. The following
parts will be moved forward one. When you
press , the currently displayed part will be deleted.
Press the below " > Copy".
Function
Copy the specified range of parts to another location.
Explanation
This copies the parts specified by "(Part *** - ***)"
and places them in front of the part specified in "
Part ***". After specifying the three part numbers,
press the below " > GO". When the display asks
"Are you sure?", press
copied.
Note:
If you want to copy only one part, specify the same
part number for both locations of "(Part *** - ***)"

Search

Press the below " > Search".
Function
Jump to a marked part.

Copy

, and the parts will be
Using the rhythm machine 75