Delete - Yamaha V50 Authorized Product Manual

(3) Press the below " > Load" to get the following
display.
You can press the
to the previous display.
(4) Press a to select one of the following types
of data to load.
ALL Load synthesizer, sequencer, and rhythm
machine data from disk.
SYN Load only synthesizer data from disk.
SEQ Load a sequencer song from disk into the
currently selected song memory.
R.SEQ Load only rhythm machine data (pattern,
song) from disk.
CARD Load all data from disk into the currently
inserted card. Remember that this will
erase all the data that was previously in
the card.
Be sure to select the same type of data as when you
saved. For example, if you saved "ALL" data to a
disk file, it is not possible to load only the synthesizer
data from that file.
You will then get the following display. (The "ALL"
display will differ according to the data that was
selected.)
(5) Select the file to load into memory. The name of
the selected file will be displayed.
(6) Press the below " > GO" and you will get a
message of "Are you sure?".
(7) Press and the specified data file will be loaded
from disk into the V50's memory.
106 Utility functions
below " > EXIT" to return

Delete

This function deletes a disk file. The procedure is as
follows.
Note:
If the disk's memory protect switch is on, it is not
possible to delete.
(1) Insert the disk into the disk drive.
(2) Press to get the following display.
(3) Press the below " > Del" to get the following
display.
You can press the
to the previous display.
(4) Press a to select the type of data to delete.
Be sure to select the same type as when you saved
the data. For example if you saved "ALL" data to
a disk file, it is not possible to delete only the syn-
thesizer data from that file.
You will then get the following display. (The
"ALL" display will differ according to the data that
was selected.)
(5) Select the file to be deleted. The name of the selected
file will be displayed..
(6) Press the below " > GO" and you will get a
message of "Are you sure?".
(7) Press and the specified file of data will be
deleted.
below " > EXIT" to return