Yamaha V50 Authorized Product Manual page 94

(2) Aftertouch
Function
Determine aftertouch reception.
Settings
off, on
Explanation
This determines whether to record the aftertouch of
the V50 keyboard or an external device.
off.. . . . . . Aftertouch messages will neither be received
nor recorded.
on. . . . . . Aftertouch messages will be received and
recorded. If your playing uses aftertouch, it
will be played back just as it was recorded.
(3) (3)
Velocity
Function
Determine key velocity reception.
Settings
off, on
Explanation
This determines whether to record the velocity of the
V50 keyboard or an external device.
off.. . . . . . Key velocity data will neither be received nor
recorded.
on.. . . . . . . Key velocity data will be received and re-
corded. The key velocity of each note you
play will be played back just as it was re-
corded.
(4) Click
Function
Determine when the click will sound.
Settings
off, rec, play, always
Explanation
This setting determines when the click (the metro-
nome) will sound. Select one of the following.
off . . . . . . . . . . .There will be no click.
Rec.. . . . . . . . . The click will sound only during realtime
and punch-in recording. Normally you
will use this setting.
Play/Rec. The click will sound during realtime re-
cording and playback.
Always .... The click will sound at all times while in
sequencer mode.
(5) Sync
Function
Select the clock (timing source) for the sequencer.
Settings
int, MIDI
Explanation
This setting selects what will control the tempo. Select
one of the following.
int Tempo will be controlled by the internal
. . . . . . . . .
clock. Normally this is the setting you will
select.
MIDI clock signals will determine the
MlDI
. . . . .
tempo. Select this setting when you want
to control the tempo of the V50 sequencer
from an external device.
Note:
When "MIDI" is selected, sequence playback and
realtime recording will not be possible unless a clock
signal is being received from an external device. (Step
recording will be possible.)
The clock selected here applies to both the rhythm
machine and the sequencer. If you select "MIDI" here,
the rhythm machine will also be set to MIDI clock.
This setting can also be made from the rhythm ma-
chine mode (see page 68).
Using the sequencer 89