The following state transition diagram explains the above steps pictorially, while setting an IP address using
the LCD device. After entering an IP address, the user has to select "Set" item to set the entered IP address to
the corresponding parameter (IP Address, Subnet Mask or Gateway).
8.5.3
RMM4 IP
Same screen shots and the same description as that of the previous section ("BMC IP") are applicable for
"RMM4 IP" configuration menu also.
8.5.4
Boot Device
If the user selects "Boot Device" in the "Config" menu, then the following options will be displayed. The
selected item will be set as the next boot option and it will not be a permanent change.
8.5.5
Banner
When the user selects "Banner" in the "Config" menu, the following options will be displayed. The selected item
will be set as banner and the same will be displayed from next banner screen onwards.
Each of the menu items are explained below:
Server Name: Displays the value specified in the product name in the product FRU information in the main
board BMC FRU. The "Server Name" is the default banner.
Server Model: Displays the value specified in the product part number in the product FRU information in
the main board BMC FRU.
48
®
Intel
Server System R1000GZ/GL Product Family TPS
Enter
Left
Pos:
x-1
Right
Figure 42. State transition diagram for setting IP Address
^ | CD\DVD | Hard Drive | Network
Boot | EFI Shell
Figure 43. Boot options configuration menu
^ | Server Name | Server Model | Error |
BMC IP | RMM4 IP | Power | Last PC |
Custom String | Custom Logo
Figure 44. Banner configuration menu
Revision 1.1
Left/
Right
Increment/
Decrement
Enter
Right
Pos:
x
Left
Pos:
x+1