Riser Card Support; Figure 47. Add-In Card Support; Figure 48. Riser Card Assembly - Intel R1000GZ Technical Product Specification

®
Intel Server System R1000GZ/GL Product Family TPS
9.2

Riser Card Support

The system supports two single slot PCIe x16 riser cards. Each riser card is mounted to a bracket assembly
which is inserted into a riser card slot on the server board.

Figure 47. Add-in Card Support

Each riser card assembly has support for a single full height, ½ length PCIe add-in card. However, riser card
#2 may be limited to ½ length, ½ height add-in cards if either of the two SCU mini-SAS connectors on the
server board are used.
Note: Add-in cards that exceed the PCI specification for ½ length PCI add-in cards (167.65mm or 6.6in) may
interfere with other installed devices on the server board.

Figure 48. Riser Card Assembly

52 Revision 1.1