Bmc Ip; Figure 38. Ip Version Configuration Screen; Figure 39. Bmc Ip Configuration Menu; Figure 40. Bmc Ip Source Configuration Menu - Intel R1000GZ Technical Product Specification

8.5.2

BMC IP

If the user selects "BMC IP" item, in the "Config" menu then the following options will be displayed.
Selection of the "IP Source" in the above menu, leads to the following screen. Based on the user's selection in
the following menu, the firmware sets the BMC IP source as either DHCP
or Static.
If the user selects DHCP or the existing IP source is DHCP, then the other menu items, i.e. IP Address, Subnet
and Gateway are not configurable. If the user selects "Static" or the existing setting is static for IP source, then
the user is allowed to change the other menu items and the screen shots look as follows:

Figure 41. Screen shots for Configuring IP Address, Subnet Mask and Gateway

By default the cursor will be under the symbol, "^" and the IP address is displayed as 000.000.000.000. A right
button will take the cursor to the first position (first 0) of the IP address. When the cursor is under the second
menu item, the functionality of Left, Right and Enter buttons is different from the previous screens. The second
token consists of twelve 0 s' separated by '.' character in IP address format. The behaviors of these buttons
are as follows when the cursor is under this item.
1. Left and Right buttons inside the second menu item traverses among the 0 positions within the
same item.
2. If the cursor is under last position inside the second menu item, then a right button will move the
cursor to next item, that is, "Set".
3. If the cursor is under first position inside the second menu item, then a left button moves the cursor
to the previous item, that is, "^".
4. First Enter button at any "0" position makes that position to be selected to increment or decrement
the value at that position. The values allowed are between and including 0 and 9.
5. Any further Left or Right buttons will decrement or increment the value at that position.
6. Second Enter button at that position makes the cursor to be ready for moving left or right. Any
further Left or Right moves the cursor to previous or next position respectively.
7. So, the Enter button is used to select a position at the first time and to leave the position at the
second time.
®
Intel Server System R1000GZ/GL Product Family TPS
^ | IPv4 | IPv6

Figure 38. IP Version configuration screen

^ | IP Source | IP Address | Subnet |
Gateway

Figure 39. BMC IP Configuration Menu

^ | DHCP | Static

Figure 40. BMC IP Source Configuration Menu

^ | IP: 000.000.000.000 | Set
^ | Subnet: 000.000.000.000 | Set
^ | Gateway: 000.000.000.000 | Set
Revision 1.1
47