Components On The Engine Unit; Registration Sensor Harness Unit, Paper Pull-In Rollers R And L - Brother DCP375CW Service Manual

6.1.15 Components on the Engine Unit

(Earth spring, Maintenance unit, ASF motor*, Carriage motor, Star wheel holder, Paper
ejection roller, Platen, Inner chute ASSY, Registration sensor actuator, PF encoder/
registration sensor harness unit, Paper pull-in rollers R and L, ASF gear shaft outer, and
PE actuator)
Earth spring
(1) Release the upper and lower ends of the earth spring from the CR guide rail and the ASF
motor holder, respectively.
Assembling Note: When mounting the earth spring, take care not to contaminate it with
grease.
First hook the upper end on the CR guide rail and insert the lower end under the ASF
motor. The earth spring twines around the ASF motor by itself with the spring force. After
mounting it, check that the earth spring is in contact with the metal part of the ASF motor.
Maintenance unit
CR guide rail
CR guide rail
ASF motor
6-78
*ASF motor: Auto Sheet Feeder motor
Earth spring
Earth spring
ASF motor
(6_75)
Confidential