Disassembly Of Control Panel Assy; Models With Color Lcd - Brother DCP375CW Service Manual

6.1.6

Disassembly of Control Panel ASSY

(The control panel ASSY contains the media module cover.)

Models with color LCD

(1) Place the control panel ASSY upside down.
(2) Release the three/four "x" latches and take the control panel PCB ASSY (consisting of two
PCBs) out of the control panel base.
DCP395CN and MFC495CW/795CW: Three "x" latches
DCPJ125/J315W/J515W/J715W and MFCJ220/J265W/J270W/J410/J410W/J415W/J615W/J630W:
Four "x" latches
NOTE: Models with microphone: Before removing the control panel PCB ASSY, release
the microphone harness
control panel base and take the microphone
Assembling Note: When mounting the control panel PCB ASSY, first fit it below the four
tabs (see the illustration given below and on the next page) on the control panel base and
then secure it with three/four "x" latches.
(3) Remove the rubber keypads (and keys depending upon the model).
DCP395CN and MFC495CW/795CW
Control panel PCB ASSY
Rubber keypad
1
Microphone *
1
Microphone cover *
Latch "x"
*1
(a part of panel-main harness) from the cable guides on the
Panel-main harness
Tabs
Latch "x"
*1
and its cover
The illustration below shows the control panel ASSY of the
MFC795CW. It differs depending upon the model.
Touch panel
2
harness
*
Tab
Tab
(Front)
LCD flat cable
Grounding wire
1
Cable guide *
6-29
*1 For models with microphone
*2 For models with touch panel
*1
out of the control panel base.
Rubber keypad
Control panel base
Latch "x"
2
*
(6_33_MFC_r1)
Confidential