Brother DCP375CW Service Manual page 210

Separating the ADF unit from the document cover
(8) Turn the ADF & document cover ASSY upside down.
(9) Remove the seven screws from the ADF unit.
DCP375CW/395CN and MFC255CW/295CN/495CW/795CW: Five "a," one "b," and one "c" screws
DCPJ125/J315W/J515W/J715W and MFCJ220/J265W/J270W/J410/J410W/J415W/J615W/J630W:
Seven "d" screws
(10) Release seven/eight "X" latches provided on the document cover and lift up the right end of
the ADF unit at approx. 30°.
DCP375CW/395CN and MFC255CW/295CN/495CW/795CW: Seven "X" latches
DCPJ125/J315W/J515W/J715W and MFCJ220/J265W/J270W/J410/J410W/J415W/J615W/J630W:
Eight "X" latches
(11) Press "Y" latch on the ADF unit outwards to release it from the document cover and then
slide the ADF unit to the upper right, being careful with the document feed roller 2 ASSY.
The ADF cover also comes off.
DCP375CW/395CN and MFC255CW/295CN/495CW/795CW
ADF unit
4
"a"
Document feed
roller 2 ASSY
Positioning
bosses
(Left)
1
"a"
7
"c"
5
"a"
Latch "Y"
"X"
6-17
Tightening order:
Tighten seven screws
in the order of to
1 7
6
2
"b"
3
"a"
"a"
"X"
"X"
(Rear)
Latches "X"
Groove
ADF cover
.
Document
cover
"a": Taptite, bind B M4x12
"b": Taptite, cup B M3x8
"c": Taptite, cup B M3x12
(6_20_2)
Confidential