Brother DCP375CW Service Manual page 204

(8) Open the scanner cover at approx. 80° and pull it to the rear and off the machine.
CIS motor
harness
Document front
1
sensor harness*
Document rear
1
sensor harness*
1
ADF motor harness*
Assembling Note: If you replace the scanner cover, specify the CIS type into the
EEPROM in the maintenance mode (Function code 59), referring to
9.4.17. After that, acquire the white level data and set the CIS scanner area in the
maintenance mode (Function code 55), referring to
CIS flat cable
Flat core
Grounding
Scanner cover
1
wire*
damper
Scanner cover
support
6-11
*1 For models with ADF
Scanner cover
(Scanner unit)
Chapter 9, Section
Upper cover
Lower cover
(6_07_mini9e)
Chapter 9, Section
9.4.15.
Confidential