Brother DCP375CW Service Manual page 231

(2) Disconnect the speaker harness
provided on the upper cover.
(3) Remove the speaker spring (wire spring)
the upper cover.
Speaker spring
Speaker
Cable guide
2
Speaker
*
Upper cover
Assembling Note: After mounting the speaker
on the upper cover, route the speaker harness
as shown on the previous page.
*2
from the main PCB and release it from the cable guides
2
*
2
*
6-38
*2 *2
and the speaker from the pocket provided on
Upper cover
Connector for
2
speaker harness
*
Main PCB
Cable guide
*2
and its spring
*2
through the cable guide on the upper cover
*2 For models with speaker
(6_38_mini9e_E)
*2
into the pocket provided
Confidential