Entry Into The Maintenance Mode - Brother DCP375CW Service Manual

9.1

ENTRY INTO THE MAINTENANCE MODE

For models without touch panel
(1) Press the Menu and Black Start (Mono Start) keys in this order. Next press the
four times to switch the machine to the maintenance mode.
The machine
"
the maintenance mode, a mode in which the machine is ready to accept entry from the keys.
TIP: Models with numerical keypad on the control panel can enter the maintenance mode
in the same way as conventional models; that is, by pressing the Menu, *, 2, 8, 6 and 4
keys in this order.
(2) To select one of the maintenance-mode functions listed in
corresponding 2-digit function code with the numerical keys on the control panel. (The
details of each maintenance-mode function are described in
NOTES • To exit from the maintenance mode and switch to standby, press the 9 key
For models with touch panel
(1) Press the Menu key.
TIP: When the touch panel is inoperable, simultaneously press the Scan and Copy keys on
the control panel, instead of the Menu key.
(2) Press the Black Start (Mono Start) key on the control panel. Next press the Scan key four
times.
The machine
"
stage of the maintenance mode, a mode in which the machine is ready to accept entry from
the keys.
beeps for
" on the LCD, indicating that it is placed in the initial stage of
twice in the initial stage of the maintenance mode. For models without
numerical keypad, press the
and then press the OK key. Repeat this operation to enter 9 again.
• Pressing the Stop/Exit key after entering only one digit restores the machine to
the initial stage of the maintenance mode.
• If an invalid function code is entered, the machine resumes the initial stage of
the maintenance mode.
beeps for
" on the touch panel, indicating that it is placed in the initial
approx. one second
/ key several times to display 9 on the LCD
approx. one second
9-1
(MFC only) and
Section 9.2, enter the
Section 9.4.)
(MFC only) and
key
displays
displays
Confidential