Battery Usage - Motorola MT2070 User Manual

2 - 68 MT2070/MT2090 User Guide
Power Transmit Options (Ad-Hoc Mode)
Table 2-17
Field
Full Select Full power for the highest transmission power level. Select Full power when operating in
highly reflective environments and areas where other devices could be operating nearby or
when attempting to communicate with devices at the outer edge of a coverage area.
30 mW Select 30 mW to set the maximum transmit power level to 30 mW. The radio transmits at the
minimum power required.
15 mW Select 15 mW to set the maximum transmit power level to 15 mW. The radio transmits at the
minimum power required.
5 mW Select 5 mW to set the maximum transmit power level to 5 mW. The radio transmits at the
minimum power required.
1 mW Select 1 mW for the lowest transmission power level. Use this level when communicating with
other devices in very close proximity or in instances where little or no radio interference from
other devices is expected.
Tab to Next > and press ENT to display the Battery Usage dialog.

Battery Usage

Use the Battery Usage dialog to select power consumption of the wireless LAN. There are three settings available:
CAM, Fast Power Save and MAX Power Save. Battery usage cannot be configured in Ad-Hoc profiles.
Battery Usage Dialog Box
Figure 2-83
NOTE Power consumption is also related to the transmit power settings.
Description