Inserting the Battery
The battery resides in a chamber in the scanner handle. To insert the battery:
Insert a coin or flathead screwdriver in the slot at the base of the scanner, then turn the slot counterclockwise
1.
to release the latch.
Lift the latch.
2.
If a battery is already installed, turn the scanner upright to slide the battery out.
3.
Slide the new battery into the chamber, with the rounded side toward the back and the contacts facing into the
4.
chamber.
Inserting the Battery
Figure 1-6
Close the latch.
5.
Insert a coin or flathead screwdriver in the slot at the base of the scanner, press down gently, and turn the slot
6.
clockwise to lock the latch in place.
Getting Started
1 - 7