User Name - Motorola MT2070 User Manual

A dialog displays that lists the certificate files found with the default extension.
2.
Open Screen
Figure 2-64
Browse to the file and select OK.
3.
A confirmation dialog verifies the installation. If the information in this dialog is correct, select Yes. If the
4.
information in this dialog is not correct select No. The wizard returns to the Installed Server Certs dialog. Select
the newly-installed certificate from the drop-down list.
Confirmation Dialog Box
Figure 2-65

User Name

The user name and password can be entered (but is not required) when the profile is created. If the username and
password are not entered in the profile, then when attempting to connect, the user is be prompted to supply them.
The entered information (credentials) is saved (cached) for future reconnections.
Whether or not the username and password are entered into the profile affects how the profile is treated during a
Profile Roaming operation. Profiles are excluded from consideration if they require user entry of credential
information.
If the profile uses an authentication tunnel type of EAP-GTC and Token is selected (see
then you can control certain behavior by whether you choose to enter a value in the Enter User Name field. If you
enter a value in the Enter User Name field, then whenever the Fusion software prompts you to enter credentials,
the username field in the interactive credential dialog is initialized with the value that you entered when you created
the profile. If you enter a different value in the username field of the interactive credential dialog, it is cached and
used to initialize the username field the next time the interactive credential dialog is shown for that profile. If you do
not enter a value in the Enter User Name field when you create an EAP-GTC token profile, then the username field
in the interactive credential dialog is initialized to blank. After you enter a username in the interactive credential
Operating the MT2070/MT2090 2 - 55
Password on page 2-56),