Errors While Scanning; Symbology Parameter Defaults - Motorola MT2070 User Manual

12 - 2 MT2070/MT2090 User Guide

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

Symbology Parameter Defaults

Table 12-1 lists the defaults for all symbologies parameters.Scan the appropriate bar codes in this guide. These
new values replace the standard default values in memory. To recall the default parameter values, scan the
Default Parameter on page
NOTE See
parameters.
Parameter Defaults
Table 12-1
Parameter
UPC/EAN
UPC-A
UPC-E
UPC-E1
EAN-8/JAN 8
EAN-13/JAN 13
Bookland EAN
Decode UPC/EAN/JAN Supplementals (2 and 5 digits)
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
UPC/EAN/JAN Supplemental Redundancy
UPC/EAN/JAN Supplemental AIM ID Format
Transmit UPC-A Check Digit
Transmit UPC-E Check Digit
Transmit UPC-E1 Check Digit
UPC-A Preamble
UPC-E Preamble
UPC-E1 Preamble
Convert UPC-E to A
5-4.
Appendix A, Standard Default Parameters for all user preferences, hosts, and miscellaneous default
Parameter
Default
Number
01h Enable
02h Enable
0Ch Disable
04h Enable
03h Enable
53h Disable
10h Ignore
F1h 43h
F1h 44h
50h 10
F1h A0h Combined
28h Enable
29h Enable
2Ah Enable
22h System Character
23h System Character
24h System Character
25h Disable
Set
Page Number
12-7
12-7
12-8
12-8
12-9
12-9
12-11
12-13
12-13
12-14
12-14
12-14
12-16
12-16
12-16
12-18
12-19