Hexadecimal Keys - Motorola MT2070 User Manual

2 - 62 MT2070/MT2090 User Guide
Encryption / Authentication Matrix (Continued)
Table 2-12
Authentication
Legacy (Pre-WPA)
Open
PEAP
LEAP
TTLS
If either WEP-40 (40/24) or WEP-104 (104/24) is selected, the wizard displays the key entry dialog unless the Use
Passkey check box was selected in the Encryption dialog (see
shows only if the authentication is set to None.

Hexadecimal Keys

To enter the hexadecimal key information select the Hexadecimal Keys radio button. An option is provided to hide
the characters that are entered for added security. To hide the characters select the For added security - Mask
characters entered check box.
To enter a hexadecimal key with characters hidden:
Select the For added security - Mask characters entered check box.
1.
Tab to Next > and press ENT.
2.
WEP-40 and WEP-104 WEP Keys Dialog Boxes
Figure 2-74
For WEP only, in the Edit Key drop-down list, select the key to enter.
3.
In the Key field, enter the key.
4.
For WEP-40 enter 10 hexadecimal characters.
a.
For WEP-104 enter 26 hexadecimal characters.
b.
For TKIP enter 64 hexadecimal characters.
c.
For AES enter 64 hexadecimal characters.
d.
In the Confirm Key field, re-enter the key. When the keys match a message appears indicating that the keys
5.
match.
Repeat for each WEP key.
6.
WPA
Personal
WEP TKIP
WEP-104
WEP-104
WEP-104
Encryption
WPA2
WPA Enterprise
Personal
AES TKIP
Yes
Yes
Yes
Figure 2-67 on page
WPA2 Enterprise
AES
Yes
Yes
Yes
2-56). The Key Entry dialog