5 - 16 MT2070/MT2090 User Guide
Picklist Mode
Parameter # F0h 92h
Picklist mode enables the device to decode only bar codes that are aligned under the laser crosshair. Select one of
the following picklist modes for the device:
•
Disabled Always - Picklist mode is always disabled.
•
Enabled in Hand-Held Mode - Picklist mode is enabled when the device is out of hands-free mode and
disabled when the device is in presentation mode.
•
Enabled in Hands-Free Mode - Picklist mode is enabled when the device is in hands-free mode only.
•
Enabled Always - Picklist mode is always enabled.
NOTE If you enabled DPM Scanning on
Picklist performance is not guaranteed for DPM bar codes.
*
Disabled Always
Enabled in Hands-Free Mode
page
(00h)
(03h)
5-21, disable Picklist Mode when scanning a DPM bar code.
Enabled in Hand-Held Mode
Enabled Always
(01h)
(02h)