14 - 8 MT2070/MT2090 User Guide
Special Commands
Pause Duration
Use this parameter, along with
pause by scanning a two-digit number (i.e., two bar codes) from
intervals. For example, scanning bar codes 0 and 1 inserts a 0.1 second pause; 0 and 5 inserts a 0.5 second delay.
To correct an error or change a selection, scan
Begin New Rule
Scan the bar code below to start entering a new rule
.
Send Pause on page 14-32,
Cancel on page
Pause Duration
Begin New Rule
to insert a pause in the data transmission. Set the
Appendix D, Numeric Bar Codes
D-3.
in 0.1 second