Scan Inventory - Motorola MT2070 User Manual

Scan Inventory

When Scan Inventory is selected on the Main Menu, the Scan Inventory screen displays
screen the user must enter the location in which the inventory is scanned. When a location is not entered, two short
beeps sound indicating an error.
Use the keypad to enter a location and press ENT to continue.
1.
Scan Inventory Screen
Figure 2-40
Upon pressing ENT, the Scan screen displays.
2.
Scan Inventory Scan Screen
Figure 2-41
: Use the keypad to enter a quantity into this field. Scanning is disabled when this field is highlighted.
3.
: Scan a bar code to enter data into this field. Scanned data in this screen is stored on the FFS file
4.
system and can be viewed, deleted, or transmitted to MCL Link.
Operating the MT2070/MT2090 2 - 37
(Figure 2-40). On this