BTExplorer
BTExplorer is used to configure Bluetooth services and settings as well as to establish connections to other
Bluetooth devices.
NOTE ADCServices must be disabled in order to use BTExplorer.
To launch BTExplorer:
From the main menu, navigate to and select Config ... .
1.
Select BTExplorer. If a previous connection was established, the Favorites window displays (see
2.
on page
2-97).
If no previous connections were established, the following window displays the New Connection Wizard.
BTExplorer - New Connection Wizard Screen
Figure 2-124
Establish a New Connection
The Wizard provides a simple step-by-step process to discover and connect to Bluetooth devices.
To discover services on a remote device and establish a serial port connection:
On the New Connection Wizard window
1.
options from the drop-down list:
•
Explore Service on Remote Device
•
Pair with Remote Device
•
Active Sync via Bluetooth
•
Browse Files on Remote Device
•
Connect to Printer
•
Send or Exchange Objects
•
Associate Serial Port.
NOTE If you select Active Sync via Bluetooth, ensure that the Bluetooth software is set up properly on the host
device.
(Figure
2-124), use the keypad and select one of the following service
Operating the MT2070/MT2090 2 - 95
Figure 2-128