Signal Strength; Current Profile - Motorola MT2070 User Manual

•
Versions:
•
Quit:
Each option screen contains a back button

Signal Strength

The Signal Strength screen provides information about the connection status of the current wireless profile
including signal quality, missed beacons and other statistics described below. The BSSID address (shown as AP
MAC Address) displays the AP currently associated with the connection. In Ad-Hoc mode, the AP MAC Address
shows the BSSID of the Ad-Hoc network. Information in this screen updates every 2 seconds.
To open the Signal Status screen, select Signal Strength in the Wireless Status screen.
Signal Strength Screen
Figure 2-108
After viewing the Signal Strength screen, select the back button to return to the Wireless Status screen.

Current Profile

Signal Strength Status
Table 2-24
Field
Signal Displays the Relative Signal Strength Indicator (RSSI) of the signal transmitted between the AP
and device. As long as the Signal Quality icon is green the AP association is not jeopardized. If the
icon is red (poor signal), an association with a different AP could be warranted to improve the
signal. The signal strength icon changes depending on the signal strength.
Status Indicates if the device is associated with the AP.
Signal Quality Displays a text format of the Signal icon.
Displays software, firmware and hardware version numbers.
Exits the Wireless Status screen.
Excellent Signal
Very Good Signal
Good Signal
Fair Signal
Poor Signal
Out of Range (no signal)
Operating the MT2070/MT2090 2 - 83
to return to the main Wireless Status screen.
Description