Four Slot Battery Charger; Features; Inserting Batteries; Charging Batteries - Motorola MT2070 User Manual

13 - 8 MT2070/MT2090 User Guide

Four Slot Battery Charger

The SAC2000-4000CR four slot spare battery charger charges up to four single spare batteries. The cradle can sit
on a desktop or be mounted on a wall. This document provides basic instructions for cradle set up and use.
For best performance, fully charge the device battery before using the device for the first time. To charge the
device battery, insert the battery in the cradle. The battery begins charging when the LED indicator on the battery
charger starts flashing green. A complete charge of a fully discharged battery can take up to four hours. Charge
within the recommended temperature of 32° to 104° F (0° C to 40° C) nominal, 41° to 95° F (5° to 35° C) ideal.
Only use Motorola battery pack P/N 82-108066-01, rated 3.7V 2400mAh 8.88 Wh.

Features

See Cradle Features on page

Inserting Batteries

To insert batteries in the cradle, align the connectors on the bottom of the battery with the battery charging
connectors in the cradle. Push down on the top of the battery until it clicks into place, engaging the contacts in the
cradle.
Inserting Batteries
Figure 13-2

Charging Batteries

The battery begins charging when the green LED indicator flashes. A complete charge of a fully discharged battery
can take up to four hours using external power.
1-4.