Nortel 1150E User Manual page 52

Virtual Private Network
Figure 19: Autodiscover Phone (more than one phone was
discovered) window
a. Obtain the MAC address of the IP Phone for which you are
configuring the VPN. The MAC address is printed on a label
located on the back of the IP Phone.
b. Select the IP Phone to configure from the drop-down list.
c. Click Next.
17. When the Configure phone window appears, as shown in
on page 53, click
session that configures the VPN feature on the IP Phone.
52
Configure phone
to initiate the provisioning
Figure 20