Nortel 1150E User Manual page 32

Figure 5: Removing the stand
2. Connect the global power supply (optional). Connect the global power
supply to the AC adapter jack in the bottom of the phone. Form a
small bend in the cable, and then thread the adapter cord through the
channels in the stand.
Use your IP Phone 1150E with the approved global
power supply (model NTYS17BAE6).
Note 1: Your IP Phone 1150E supports both AC power and Power
over Ethernet options, including IEEE 802.3af standard power. To
use local AC power, the optional global power supply can be ordered
separately. To use Power over Ethernet, where power is delivered