Nortel 1150E User Manual page 50

Virtual Private Network
The progress bar displays the percent complete of the software
transfer.
h. Restart your IP Phone.
i. Click Next.
j. Go back to
15. When the Autodiscover Phone window appears, as shown in
Figure 18 on page 51,
connected IP Phones.
Note: Click
Stop
The text "Searching for connected phones" displays while the
connected IP Phones are located. The text "Autodiscovery complete"
displays in the Nortel Phone VPN Configuration Wizard tool when the
search is finished.
If the search is successful, "Listening Mode: Connected" appears in
the IP Phone display area.
If the search is not successful, do the following
• Ensure that the IP Phone continues to display "Listening
Mode: Listening..." during the Autodiscovery process. If
your IP Phone does display this message, power down the
IP Phone and repeat the steps, starting with
page 45.
• Ensure that UDP Port 49000 is not currently blocked by
your PC firewall.
• Ensure that UDP Port 49000 is not already in use by
existing applications on your PC.
• Review the log.txt file for additional information.
50
Step 12 on page 45
click
Autodiscover Phone
to stop the search.
and repeat the steps.
to discover
Step 11 on