Virtual Private Network
Address based Priority, and IP Address based Priority. To configure
QoS, see your router documentation.
Installing and configuring VPN
Use the following procedure to install and configure VPN on your IP
Phone.
Note: Depending on the version of software installed on your IP
Phone, you may need to upgrade the software on the IP Phone prior
to configuring the VPN feature.
To install and configure VPN
1. To obtain the required files, follow the instructions provided by your
system administrator.
2. Power-down the IP Phone.
3. Run the Nortel Phone VPN Configuration Wizard.jar file.
The Welcome & language selection window of the Wizard appears,
as shown in
Figure 10 on page
40
41.