Omron POWLI BU60RE Instruction Manual page 62

7
. Using the UPS monitoring software and contact signal
7-3-2. Perform UPS service setup.
You need to make Windows settings in order to perform auto shutdown. There is no need to install
software.
Start up the computer after connecting it with the UPS.
Perform "Log on to Windows" as the Administrator.
After logging on, follow the instructions below to set up the UPS service.
How to set up UPS service (shut down Windows when low battery level is detected)
1) Double-click the "Power supply options" icon in "Control Panels".
2) Click the "UPS" tab in the "Power supply options" window.
Click the "Select (S)" button.
3) Click the button on the right of the "Select manufacturer (S)" window, and select "General" from
the list.
Click on "Custom" in the "Select model (M)" window.
Click the button on the right of the "Port (P)" window, and select from the list the port that the
UPS is connected to. (In the example screen below, the UPS is connected to COM1.)
Click the "Next (N)" button.
50