Speed Dialing; Station Speed Dial - Inter-Tel 8600 User Manual

S D
PEED IALING
Speed dialing allows you (and your system administrator) to store and access fre-
quently dialed numbers. Each number is stored in your endpoint (Station Speed Dial)
or in the telephone system (System Speed Dial) and is identified by a location num-
ber. Once programmed, you can quickly dial these numbers by entering a feature code
and dialing the desired location number. Because the system supports both Station and
System Speed-Dial numbers, you can have access to over 1000 stored numbers.

Station Speed Dial

You can program and use up to ten personal speed-dial numbers on your endpoint. To
use a speed-dial button, you must:
•
Store the number in a speed-dial location.
•
Associate a speed-dial location with the new speed-dial button.
NOTE:
programmable feature buttons.
Programming Station Speed-Dial Numbers
To store a speed-dial number, use the Station Speed-Dial Programming feature code
to program the number in a speed-dial location. Use the following table to list the
numbers that you store in speed-dial locations 0-9.
®
Inter-Tel Model 8600 User Guide (ITP Mode)
You can use the Speed-Dial feature even if your endpoint does not have
0 _______________________
1 _______________________
2 _______________________
3 _______________________
4 _______________________
5 _______________________
6 _______________________
7 _______________________
8 _______________________
9 _______________________
51