Forwarding Calls; Manual Call Forwarding - Inter-Tel 8600 User Manual

F
ORWARDING
With the Forwarding feature, you can have calls follow you (e.g., forwarded to a cell
phone), or you can redirect calls to a voice mail or other extension.

Manual Call Forwarding

Manual call forwarding allows you to send incoming calls to another extension num-
ber. You can even forward calls to outside numbers, if your endpoint is programmed
to allow this.
To forward calls:
1. EITHER, Press
OR, Dial one of the following feature codes:
•
3
out ringing at your endpoint.
•
3
they are not answered before a timer expires.
NOTE:
•
3
ing calls are forwarded without ringing at your endpoint.
•
3
warded if your endpoint is busy or if you do not answer, as described above.
Do one of the following:
2.
• To forward to an outside telephone number: Select an outgoing line and dial
a telephone number.
• To forward to an extension number: Dial the extension number.
• To forward to your message center: Press
To cancel any call forward request:
EITHER, Press
OR, Dial any one of the feature codes listed above and then press
26
C
ALLS
.
FWD
(Call Forward All Calls): All incoming calls are forwarded with-
5 5
(Call Forward If No Answer): All incoming calls are forwarded if
5 6
Only the installer or system administrator can adjust this timer.
(Call Forward If Busy): When your endpoint is busy, all incom-
5 7
(Call Forward If No Answer or Busy): All incoming calls are for-
5 8
and then .
FWD
.
MSG
.
®
Inter-Tel Model 8600 User Guide (ITP Mode)