Receiving Intercom Calls - Inter-Tel 8600 User Manual

If there is no answer or if the endpoint is busy when you place an intercom call,
you can do any of the following:
•
To leave a station message: Press
•
To leave a voice mail message: Press
answer. (See
NOTE:
•
To camp onto a busy extension: Stay on the line and wait for the endpoint to
become available. Do not hang up. After the system timer expires, you hear
music until the endpoint is available.
NOTE:
•
To request a callback (queue on to the endpoint): Press
the endpoint is available, your endpoint rings. (To cancel the queue request
before the callback, press

Receiving Intercom Calls

Your endpoint can receive both intercom and non-handsfree intercom calls. If the
handsfree feature is enabled on your endpoint, intercom calls are automatically
answered, however you must pick up the handset to reply to the caller. Non-handsfree
intercom calls (see
To enable or disable your endpoint's handsfree answering feature:
With the handset in the cradle, dial
To receive an intercom call:
If the handsfree feature is enabled, the call is automatically answered, but you must
lift the handset to respond to the caller.
If the handsfree feature is disabled, you can press
the handset to respond to the caller.
NOTE:
Because the Model 8600 does not have an external microphone, you must use
the handset to respond to the caller.
®
Inter-Tel Model 8600 User Guide (ITP Mode)
page 29 for more message options.)
This option is only available if the called endpoint has a voice mailbox.
You cannot camp on to an endpoint if it is in DND mode.
.)
6
page 18) override the handsfree option.
3
and then hang up.
MSG
and wait for the message center to
MSG
.
1 9
to answer a call, but you must lift
and hang up. When
6
19