Coping With Everyday Obstacles - Invacare TDX 4 Owner's Operator And Maintenance Manual

Invacare wheelchair
Hide thumbs Also See for TDX 4:
Table of Contents

Advertisement

SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS
To assure stability and proper operation of your wheelchair, you must at all times
maintain proper balance. Your wheelchair has been designed to remain upright and
stable during normal daily activities as long as you DO NOT move beyond the center of
gravity. DO NOT lean forward out of the wheelchair any further than the length of the
armrests. Make sure the casters are pointing in the forward position whenever you lean
forward. This can be achieved by advancing the wheelchair and then reversing it in a
straight line.

Coping with Everyday Obstacles

WARNING
DO NOT attempt to reach objects if you have to move forward in the seat or pick
them up from the floor by reaching down between your knees.
Many activities require the wheelchair user to reach, bend and transfer in and out of
the wheelchair. These movements will cause a change to the normal balance,
center of gravity, and weight distribution of the wheelchair. To determine and
establish your particular safety limits, practice bending, reaching and transferring
activities in several combinations in the presence of a qualified healthcare
professional BEFORE attempting active use of the wheelchair.
Proper positioning is essential for your safety. When reaching, leaning, bending or
bending forward, it is important to use the casters as a tool to maintain stability and
balance.
NOTE: For this procedure, refer to FIGURE 2.1
Coping with the irritation of everyday obstacles can be somewhat alleviated by learning
how to manage your wheelchair. Keep in mind your center of gravity to maintain stability
and balance.
While the walking beam allows you to traverse up to a 2-inch bump (TDX 3) or 3-inch
bump (TDX 4 or TDX 5) or threshold, stopping after the wheels cross the bump poses a
problem. The wheelchair cannot reverse over the bump at this point. Continue forward
and then turn around.
While the TDX is designed for use primarily in and around the home, the provider should
determine whether this wheelchair is suitable for the actual environment in which the
wheelchair will be used.
NOTE: DO NOT go down a ramp at full speed. Some seat/back positions will cause the wheelchair
to feel unstable.
CAUTION
Be aware of the condition of the ramp. Traction will be diminished/nonexistent on a
slippery surface. Proceed with caution.
37
Part No 1114809
TDX™ Wheelchairs

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tdx 3Tdx 5

Table of Contents