Left Cover; Removing The Cassettes; Removing The Rear Cover; Removing The Left Cover (With The Reader Assembly Intact) - Canon MF8100 Series Service Manual

MEMO
It is difficult to release three claws [2]. If you release the lowest one first,
the second lowest, and then the top, it becomes easy.

3.2.5 Left Cover

3.2.5.1 Removing the Cassettes

1) Hold the grip, and take out the cassette.

3.2.5.2 Removing the Rear Cover

1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
[3]
3) Open the reader assembly [4], and lift to free the 2 claws [5].
[1]
F-3-47
[3]
[2]
[2]
F-3-48
[1]
[3]
[2]
F-3-49
4) Close the reader assembly; then, detach the rear cover[1].
[3]
F-3-51
3.2.5.3 Removing the Left Cover (with the reader
assembly intact)
1) Disconnect the plug [1], and free the cable [2] of the reader assembly from
the guide.
0007-6970
0007-6979
2) Open the reader assembly [1] and the top cover [2].
Chapter 3
[4]
[5]
F-3-50
[1]
[3]
[2]
[2]
[2]
[1]
F-3-52
0007-6980
3-9