Removing The Developing Rotary/Toner Level Detection Pcb; Toner Cartridge Motor; Removing The Rear Cover - Canon MF8100 Series Service Manual

Chapter 3
3) While pushing the boss [1], release the rotary release lever (right) [2] in
upward direction.
[2]
4) While pushing the boss [1], release the rotary release lever (left) [2] in
upward direction.
[1]
5) While paying attention to the engagement of the rotary release lever (left/
right) [1], lift the developing rotary assembly [2] to detach.
[1]
When mounting the developing rotary assembly, be sure that the 2 tips of the
rotary holder are fully fitted to the frame of the machine.
3.5.11.16 Removing the Developing Rotary/Toner Level
Detection PCB
1) Remove the 3 claws [1], and detach the developing rotary/toner level
detection PCB [2] from the developing rotary assembly.
3-120
[1]
F-3-779
[2]
F-3-780
[1]
[2]
F-3-781

3.5.12 Toner Cartridge Motor

3.5.12.1 Removing the Rear Cover

1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
[3]
3) Open the reader assembly [4], and lift to free the 2 claws [5].
4) Close the reader assembly; then, detach the rear cover[1].
[3]
0007-8854
F-3-785
[1]
[2]
F-3-782
[1]
[3]
[2]
F-3-783
[4]
[5]
F-3-784
[1]
[3]
[2]
0007-8556