Removing The Face-Down Cover; Removing The Top Cover - Canon MF8100 Series Service Manual

[1]
[1]

3.2.18.7 Removing the Face-Down Cover

1) Remove the 2 screws [1], and slide the face-down cover [2] in downward
direction to detach.

3.2.18.8 Removing the Top Cover

1) Remove the claw [1], and detach the ring gear [2].
2) Free the link lever [3] from the shaft [4].
[1]
3) Remove the 3 binding screws [1] and 2 TP screws [2]; then, disconnect
the connector [3], and detach the top cover [4].
[1]
[1]
F-3-260
[1]
[2]
F-3-261
[3]
[4]
[2]
F-3-262
[1]
0008-2729
When attaching the top cover, be sure to match its 2 positioners [1] and the
2 cut-offs [2] of the face-down sub cover, while making sure that the paper
retainer [3] is not blocking the feed path.
0008-2731
Enlarged View of the Paper Retainer
[3]
When attaching the top cover, be sure to fit the link lever [2] while keeping
the drive release lever [1] in up position (i.e., with drive disengaged).
[2]
[1]
[3]
F-3-263
[1]
[2]
F-3-264
OK NG
[3]
F-3-265
Chapter 3
[4]
3-41